Horizontal Tank

Tabarestan Horizontal Tank

The horizontal tanks of "Tabarestan Plastic Complex" are produced using high-quality polyethylene to be usable for many years. You can store drinking water and liquids compatible with polyethylene in a suitable tank by purchasing a horizontal tank. These tanks are not damaged even by long-term exposure to direct sunlight and do not bring any harmful substances into the water and other liquids. Plastic tanks have a special advantage over the metal ones since they are considered a long-term investment both in terms of performance and price. You can see the product specifications through this page and then proceed to receive specialized consultation, price list of the horizontal tanks, and to buy a horizontal water tank by finding the information of the agency in your city.

Advantages of Purchasing Tabarestan Horizontal Polyethylene Tanks

Up next, we mention the horizontal water tank advantages:

High strength and impact-resistant

Resistant to acid and alkali substances

Resistant to heat and freezing

Resistant to chemical agents, temperature changes, adverse weather conditions, and UV rays

No worries about height restrictions in tight spaces with short ceiling

It has a wide range of capacities, dimensions, and layers according to consumer needs (customized)

No corrosion and rust

Cost-effective compared to metal tanks

Specifications of Tabarestan Horizontal Water Tank

All horizontal tanks of "Tabarestan Plastic Complex" are produced from safe and hygienic raw materials, and food-grade materials. Our products have a production license from the Ministry of Health, Treatment, and Medical Education. For this reason, these products can be used without any changes in color, smell, and taste of drinking water for a long time.

All the tanks can be produced in two, three, and four layers with foam if requested by the customer. Three- and four-layer tanks have an anti-sunlight layer that prevents the algae growth in them. The foam layer is installed in the middle of the foamed tanks to prevent the transmission and exit of heat and cold through the tank wall and to keep the temperature of the liquids inside the tank constant.

The tanks produced by "Tabarestan Plastic Complex" are sold in under-truck, horizontal shutter types in capacities of 50 to 30,000 liters. Each capacity of the tank has different dimensions (length, width and height). These tanks are also produced without seams, and the absence of seams helps to maintain the shape and strength of the product and prevents cracks and leaks.

You can use the vertical tank, which takes up less space, if the horizontal tank is spacious for you.

Application of Horizontal Polyethylene Tanks

Horizontal tanks are used for drinking water in buildings, food industry, and agricultural industry. The horizontal tanks are used in the agricultural industry to store and transport chemicals such as liquid fertilizer, water, and other materials for pest control plans. In general, horizontal polyethylene tanks are used for the following purposes:

Storage and maintenance of consumable drinking water

Increasing the water pressure of buildings and residential complexes

Storage and maintenance of water in fire stations

Storage and maintenance of oil and fuel

Storage and maintenance of all kinds of chemicals compatible with polyethylene

Storage and maintenance of acidic and alkaline materials

It should be noted that the polyethylene tanks application varies according to their multi-layeredness changes; therefore, before purchasing, it is necessary to consult with our experts and representatives about the material you are going to keep and store.

Important Tips in Purchasing a Horizontal Tank

You should pay attention to some of the following important points when purchasing a water supply:

The importance of paying attention to the ingredients and the quality of tank production

Determining the tank capacity based on the amount of liquid and water storage required

Measuring the dimensions of the building door and corridor to transport and install the tank

Measuring the dimensions of the tank installation site for inspection, service, and maintenance

Checking the diameter of the tank outlet with pump inlet (should be equal or greater)

Flatness and leveling of the tank deployment location

Tank selection based on the type of liquid (a single-layer tank is suitable for liquids other than water)

Carrying out the loading and transporting of the polyethylene water tank by experienced and trained individuals

Horizontal Tanks Price (Quotation)

The horizontal polyethylene tank price is affordable compared to the metal tank but the daily price of the horizontal tanks is determined according to various factors. For example, the more the capacity and dimensions of the tank, the higher the price. In general, the factors such as the producer factory, production quality, presence of impurities and additives, ingredients, tank dimensions and capacity, wall thickness, and amount of supply and demand influence the final price of these tanks.

We suggest that if you have a under-stair in the building and it has the right space for the (water) supply you want, then you can use a under-stair tank since it occupies much less space.

Purchasing a Horizontal Water Tank from "Tabarestan Plastic Complex"

"Tabarestan Plastic Complex" is considered as one of the reliable producers of polymer products in the country. The company uses the best raw materials in production of its horizontal tanks, and the quality control is carried out with high sensitivity. The final goal of "Tabarestan Plastic Complex" is that consumers can utilize the tanks with a long lifespan depending on their needs. Our polyethylene tanks have the standard mark of the National Organization for Standards and Health Permission. You can contact our sales team to select and place the order for a proper tank.