Using the water tanks has various applications, such as water storage in times of water shortages and solving the problem of low pressure. The use of water tanks has various uses, such as storing water in times of water shortages and solving the problem of low pressure. The main problem that people face when using the water tanks, especially metal tanks, is the algae growth in the tanks and, consequently, change in the smell and taste of the water inside the tank. Algae growth in the tanks causes the water to become unsanitary, and preventing and removing the algae in the water tank becomes very important in this situation. People try to prevent the algae growth in the water tanks or when their tanks are covered with algae by trying different solutions to remove them. We will fully investigate the reasons and solutions to prevent the algae formation in the polyethylene tank and to eliminate them in this article.

 

Reasons for Algae Growth in Tanks

One of the main reasons for the algae growth in the tank is the entry of sun light into the tank; For this reason, one of the problems that metal tank users always face is the algae growth in the water and change in the taste and smell of the liquids stored in the tank.

If sunlight is prevented from entering the tank, then the water tank will not be contaminated with algae. Consequently, you should use a tank that has unique features or follow the points that we will mention below in order to prevent the algae from forming in the water tank.

There are many methods that can prevent the algae growth in the water tank. All these methods seek to prevent the creation of suitable conditions for the algae growth. In general, the methods to prevent the algae growth in the water tank can be described as follows:

Sunlight entering the tank

Using tanks in inappropriate places

Extreme heat

Presence of nutrients in the supply

Tank Water Stagnation

 

Methods to Prevent the Algae Growth in Water Tank

Algae formation in polyethylene tanks alone can make the water in the tank and the water tank unusable to store the drinking water. You should be aware of the causes of the algae growth in the water tanks to prevent this from happening. These reasons are:

Using anti-algae tanks

The best way to prevent the algae growth in the water tank is to use multilayer and anti-algae tanks. Polyethylene anti-algae tanks, which are usually available in three-layer and four-layer varieties, prevent the light from entering the tank due to having a black layer. Alongside their light weight and positive features, these tanks are one of the best options to store the drinking water. Before preparing the anti-algae tanks, pay attention to the points that many companies produce these tanks but not all of them are successful in production of high-quality polyethylene tanks. Tabarestan Plastic Complex is one of the largest and best producers of anti-algae polyethylene tanks. The anti-algae products of the complex are usually known as Tabarestan three-layer anti-algae tank and Tabarstan four-layer anti-algae tank. Perhaps the best way to prevent the algae growth in the water tank is to use Tabarestan's anti-algae tanks.

Water Tank Installation in the Right Place

If you are not using the anti-algae tanks, it is very important where you install the tank. If you use a single-layer water tank, you should note that you should install the tanks in a dark environment away from direct sunlight to prevent the algae growth in these tanks. You should also note that warm weather is another cause of the algae growth, and it is better to install the tanks in a place where has the lowest possible temperature to prevent this.

As mentioned, you can prevent the algae growth in the tanks by following some tips. In general, these methods include the following things:

Using anti-algae tanks

water tank installation in the right place

Using an insulation to prevent sunlight from hitting the tanks

Cleaning the water tank periodically

Filtration and use of water purification

Using an Insulation to Prevent Sunlight from Hitting the Tanks

If you are highly sensitive to algae-formation in the tanks or if you use single-layer tanks, it is better to use special insulators in order to cover the tanks completely and prevent them from being exposed to the direct light. In addition, make sure that all branches and pipes connected to the tank are completely insulated and covered.

Periodical Cleaning of the Water Tank

Cleaning the inside of the tank periodically is another way to prevent and eliminate algae in the water tank. This method yields the best result and prevents the algae growth in the tanks and routs them completely. But note that this process must be conducted how often and periodically to achieve the desired result.

Filtration and Use of Water Purification

Using filters and multi-stage water purifications are among the best methods that prevent the algae growth in the tank to a large extent.

Is it Good to Use Chemicals to Rout the Algae in a Water Tank?

Some people use chemicals to rout the algae in the water tank. We do not recommend this at all. Using these materials can cause serious damage to the tanks and make them unusable. Furthermore, the use of these materials can endanger the human health.

If you are planning to purchase a tank and you don't know what tank to buy, then please study the article on "Is the Metal Water Tank Better or the Polyethylene One?

 

Also, please refer to the Product page, Septic Tank section to get information about the septic tank price.

Final Word

Algae growth in the water tanks is one of the events that makes the drinking water in the tank and the water tank unusable. Therefore, it is better to think about prevention before this happens. Our recommendation is to use high-quality three-layer or four-layer tanks to prevent the algae growth in the water tank. Having a layer resistant to UV rays, these tanks prevent even the smallest light rays from entering the tank.

Tabarestan Plastic Complex, the largest producer of polyethylene tanks

The largest producer of polyethylene tanks is a suitable title for Tabarestan Plastic Complex. Tabarestan Plastic Complex has been able to supply a large part of the market's needs by producing a variety of polyethylene tanks, including single-layer, three-layer, and four-layer tanks. Tabarestan Complex produces polyethylene tanks based on the highest standards and these tanks are of the highest quality. With 210 agencies nationwide, the complex offers its products to its valued customers.