Polyethylene tanks are one of the most widely used types of tanks used in various industries. People use polyethylene tanks for various actions such as providing water required by residents of buildings, irrigating gardens and fields, storing and maintaining drinking water, storing poisons and various liquids, etc. All these issues have caused many people throughout Iran and the world to purchase and use polyethylene water tanks. However, there are 3 additional reasons related to the necessity of using a water tank besides these cases. We are going to mention the advantages of using a water tank for building in this article by referring to 3 reasons for the necessity of using it.

Table of Contents:

What are the Reasons for Using a Water Tank?

Supplying the water required by building during the water outage time

Compensation of low pressure of urban water

Preventing pressure on the water network during peak hours

Conclusion

Tabarestan Plastic Complex, the top producer of polyethylene tanks in the Middle East

 

What are the reasons for using a water tank?

The reasons and advantages of using a polyethylene water tank for building can be mentioned and checked in 3 cases. In general, polyethylene tanks can prevent frequent water outages and low water pressure and provide conditions with all people to have access to water with the necessary amount and pressure. Three reasons for the necessity of using a water tank for the building are as follows:

Supplying the water required by building during the water outage time

Compensation of low pressure of urban water

Preventing pressure on the water network during peak hours

We will investigate each of these reasons in details in the following.

  1. Supplying the Water Required by Building during the Water Outage Time

One of the problems faced by residents of office, commercial and residential buildings, especially in urban areas, is frequent water outages for various reasons. People are not only not able to cook in these circumstances but the possibility of personal hygiene and hygiene items is also foreclosed to them. The best option in these circumstances is to use a water tank. Using a water storage tank, the amount of water required for a building or residential unit can be stored and used when needed. All residential flats with more than 4 floors or more than 10 apartment units must be equipped with a water supply with a capacity of at least 12 hours of consumption, based on 150 liters per person per day in Iran according to the National Building Law of Iran. The required amount of water for the building can be achieved to a certain extent according to this law and then, the most suitable tank can be purchased according to the different capacities and types of polyethylene tanks. You can have access to safe and high-quality water in times of urban water outage times by purchasing, installing, and using a water tank.

  1. Compensating for Low Pressure of Urban Water

Another problem faced by people in rural and urban areas is low water pressure. This problem is well understood by residents of upper floors and in general, buildings’ residents during the peak time of water consumption. One of the best solutions to solve this problem is to use a water tank. We have dealt with this issue completely in the article "The best way to compensate for low water pressure". You can study it if you are interested. As pointed out in the mentioned article, using the water tank in negative and ground floors along with the water pump, as well as using the tank on the roof without the need for a pump, are the best available solutions to compensate for the low pressure of urban water, especially during peak consumption time.

 

  1. Preventing Pressure on Water Network during Peak Hours

The third reason for the need to use the horizontal tank for the building is to prevent pressure on the urban water network during peak hours. The suction of water pumps installed on the buildings’ entrance network can cause significant damage to the urban water network but the pressure can be prevented by removing the direct suction of the pumps and placing the tank. In other words, there will be no more pressure on the urban water network by installing a water pump after the water tank since the water tank receives the water all the time until it is filled by connecting to the urban water and consequently, the lack of water in the urban water network does not cause double pressure on the water supply system during the peak consumption times.

 

Conclusion

We tried in this article to provide you with detailed and complete information on the reasons and advantages of using a water tank for building. As mentioned, using a water tank for building has 3 significant reasons and advantages, which are as follows:

Supplying the building's water requirements during water outage time

Compensation of low pressure of urban water

Preventing pressure on water network during peak hours

Tabarestan Plastic Complex, the top producer of polyethylene tanks in the Middle East

Tabarestan Plastic Complex is one of the best and top producers of polyethylene tanks in Iran and the Middle East and has been able to gain a significant market share by producing high-quality products. Tabarestan Complex has 210 authorized agencies throughout Iran and respected customers can go to their city agency to buy the products of the complex.