Nowadays, polyethylene tanks play a very important role in the lives of the residents of cities and villages. People buy, install, and use water tanks for various reasons such as lack of access to piped water, low water pressure, frequent water outages, etc. In such a situation where the need to use water tanks in cities and villages is well understood, the question arises for people, how to buy a water tank? People are interested in making the best choice to meet their needs and buy a tank that has high quality, longevity, and durability in addition to meeting their needs. We are going to fully explain in this article how to buy a water tank in this regard.

 

Table of Contents:

Early stages

Tank installation location

Extent of capacity required

Available budget

Buy a high-quality water tank

Tank type

Tank producer

Conclusion

 

Tabarestan Plastic Complex, the largest producer of polyethylene tanks in the Middle East

Early Stages

In general, the purchase and provision of a water tank should be made with much study and research. One should recognize the existing need well at the beginning of this path and then look for a high-quality tank among different tank producers. The person should be informed about the installation location, the required capacity, the available budget, and other things in the initial stages. For more information, you can also study What is the Best Brand of Polyethylene Water Tank? We will review the points that should be considered in the first part in the following:

 

Tank Installation Location

You should know about the tank installation location before any action because the installation location can also change the tank type such as the under-stairs one that should be used. The roof height, the available area, and radiation or lack of direct sunlight are among the things that should be checked in this section. In general, the water tank is installed in different places such as the roof, inside the unit, parking lot, and negative floors.

The tank installation in each of these spaces has its own points. For example, if the tank is installed on the roof, then the three-layer and four-layer tanks should be used to prevent the algae growth in the tank. Also, in case of the tank installation in the parking lot and negative floors, it should be noted that you cannot use vertical tanks with a high height if there are problems such as short height of the ceiling. Either vertical tanks with lower capacity or other types of tanks (such as horizontal) should be used in this case.

Amount of Capacity Required

One of the difficult things for people is to determine the amount of capacity needed. It is possible to estimate the required capacity in construction sector and residential units according to the National Building Law of Iran. According to this law, all residential units with more than 4 floors or more than 10 apartment units must be equipped with a water supply with a capacity of at least 12 hours of consumption, based on 150 liters per person per day. However, in situations where the water tank is used for agriculture and irrigation of gardens and fields, everything will depend on the experience of the person and the opinion of experts.

Available Budget

The water tank price is one of the most important things related to the purchase of the water tank in the current circumstances. In general, among various tanks such as polyethylene, galvanized, concrete, etc., the polyethylene tanks have a cheaper price. These tanks have many other advantages over other types of tanks besides the price.

Note: In relation to the polyethylene tanks’ price, it should be noted that it is sometimes seen that some profit-seeking people introduce polyethylene tanks produced from recycled materials, which have a much lower quality and price than the new tanks, under the title of first-hand and new tanks, and customers buy and use them thinking that the price of these tanks is very reasonable. The use of these tanks can cause negative impacts and great problems for the consumers. Consequently, you should never buy polyethylene tanks from unreliable producers.

Purchasing a High-Quality Water Tank

It is time to select the tank type and its producer in the second section after estimating the required capacity and checking the available space to install the tank. In general, different types of tanks are produced by several producers but recognizing the quality and durability of tanks is not an easy task and requires high expertise. We will investigate the types of tanks such as the Tabarestan vertical tank and its producers in the following in line with explaining how to produce a suitable water tank.

Tank Type

As mentioned, the polyethylene tanks have different types, such as vertical, oval, horizontal, funnel, etc., and people can buy and install any of them according to their needs and tastes. However, you should always pay attention to the fact that the reason for the difference in the design of tanks is the difference in the space available to people to install the tank. There are different types of polyethylene tanks in general including:

Vertical

Horizontal

Cubic

Doorway

Under-stair

Oval

Nissan

Expansion

Funnel

Spray

IBC

Chlorination

Tank Producer

Perhaps the most important thing to pay attention to when buying a polyethylene water tank is the water tank producer. There are many producers that produce and supply polyethylene tanks, but it cannot be said that all these producers deliver good quality tanks to customers. In general, reliable and long-standing producers are the best option to refer to for buying a polyethylene tank. These producers have been producing the polyethylene tanks for many years and are always competing with each other to capture a larger market share. Buying tanks from reputable producers and their agents makes people feel confident about the tank quality.

Conclusion

We tried in this article to provide you with useful information about how to purchase a water tank. As mentioned, some points should be paid special attention to purchase the water tank. We paid attention to such as the tank installation location, amount of capacity required, and the available budget in the first section of these tips and to the tank type and tank producer in the second section.

Tabarestan Plastic Complex, the largest producer of polyethylene tanks in the Middle East

Among all the producers of polyethylene tanks in the Middle East, Tabarestan Plastic Complex can be considered the largest producer of this type of tanks. With more than 210 agencies throughout Iran and producing various types of polyethylene tanks, the complex has been able to gain a significant share of the market. Respected customers and audience can refer to the reputable representatives of the complex in their city to buy the polyethylene tank.