Polyethylene tanks are one of the most widely used types of tanks that are widely used in various industries. This category of tanks has many features and the main reason for their popularity can be attributed to these unique features. In general, we can mention the things such as ease of installation of fittings, affordable price, light weight, ease of transportation, impact-resistance, etc. among the polyethylene tanks features.

 

We are going to explain how to drill holes (pierce) and install fittings on polyethylene tanks and instruct it in a video format in this article.

 

Guide for piercing (drilling) and installing water tank fittings + video

Polyethylene tanks are one of the most widely used types of tanks that are widely used in various industries. This category of tanks has many characteristics and the main reason for their popularity can be attributed to these unique features. In general, we can mention the things such as fittings installation ease, affordable price, light weight, ease of transportation, impact-resistance, etc. among the polyethylene tanks features.

We are going to explain how to drill hole (pierce) and install fittings on polyethylene tanks and instruct it in a video format in this article.

 

Table of Contents

Reason for Importance of Polyethylene Tanks Layout

Important points in installing polyethylene tanks

Video Guide on Polyethylene Tanks Layout

Conclusion

Tabarestan Plastic Complex, the largest producer of polyethylene tanks

 

Reason for Importance of Polyethylene Tanks Layout

The layout of polyethylene tanks is very important. Failure to install and deploy the polyethylene tanks correctly can lead to damage to the tanks. The following can be mentioned among the damages caused by the lack of proper deployment of this category of tanks:

Body deformation

Tanks anchoring

Cracking

Reduced shelf-life of tank

Tank breakage

People, who are going to get the most out of polyethylene tanks, should ensure the correct installation and layout of their tanks in the first step. In addition, please refer to our products page to know the types of tanks, to receive the size and price of vertical tank, oval tank, Nissan tank, etc.

Important Points in polyethylene tanks installation

In general, the way to install (layout of) these tanks is fully described in the manual of polyethylene tanks. You can also refer to TPC website to learn about the types of polyethylene tanks and to purchase oval, under-stair, cubic, etc. tanks. The following should be paid special attention in installation and deployment of the polyethylene tank:

 

  1. Lack of slope in the tank location

The presence of a slope causes the contents inside the tanks to not be placed properly and excessive pressure will be exerted on the tanks’ body.

 

  1. Not using stone, piece of tile, piece of concrete or any other tough object to level the tanks.

The use of stones and any tough objects to level the tanks causes pressure on the parts that are not placed on the surface and the deformation of the tanks.

  1. Tank Bottom Surface Uniformity

The non-uniformity of the bottom surface of polyethylene tanks causes an imbalance of pressure exerted on the tanks bottom and increases the possibility of damage to the tanks.

 

  1. Larger dimensions of the infrastructure (layout) of the tank

It is better for the tanks location to be at least 10-20% larger than the dimensions of the tank floor to ensure the infrastructure location suitability.

 

Video Guide on How to Install (Layout) Polyethylene Tanks

Conclusion

One should pay attention to several things in installation of polyethylene tanks since failure to install polyethylene tanks and lack of good layout can lead to damages such as breakage, cracking, reduced shelf life, etc. You should pay attention to the points related to the way of installation and layout of the tank to prevent such incidents. We tried in this article to explain well the substantial installation of polyethylene tanks using a visual guide. Please refer to Our Products page on the website to learn about different sizes of tanks and their uses, such as under-stair tank, expansion tank, etc.

 

Tabarestan Plastic Complex, the largest producer of polyethylene tanks

Tabarestan Plastic Complex is one of the top and largest producers of polyethylene tanks in Iran and the Middle East. The complex produces and markets various types of polyethylene tanks. The tanks of the complex are produced using state-of-the-art technologies and are of the highest quality. Dear customers can contact the experts of the complex to get more information and to buy polyethylene tanks produced in Tabarestan Plastic Complex.